Filter
Top Products
62 Copyright © 2004 Nokia
Charger
Scroll to the option of your choice and press Select to enter the option’s submenu
and modify its settings.
Default profile—Choose the profile you wish to be automatically activated when
your phone is connected to a charger.
Lights—Choose to keep the phone lights always on, or to shut off automatically
after several seconds. Select On or Automatic.
• SECURITY SETTINGS
Phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When phone lock is
activated, Phone locked is displayed each time you turn your phone on or off.
When the phone is locked, calls still may be possible to the official emergency
number programmed into your phone.
1 At the start screen, select Menu > Settings > Security settings.
2 Enter the lock code and press OK. (See “Lock code” on page 63.)
3 Scroll to Phone lock and press Select.
4 Scroll to one of the following options and press Select:
Off immediately turns off the phone lock feature.
Lock now immediately turns on the phone lock feature.
On power-up turns the phone lock feature on immediately after the phone is
powered up.
If you selected On power-up or On, you must enter your lock code before the
phone will function normally. Once the lock code has been accepted, your phone
functions normally.
Important: Call not allowed is displayed if you attempt to place a call
while phone is locked.
To answer a call with phone lock on, press Answer or the Talk key.
Allowed numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the emergency
number programmed into your phone (for example, 911) and the number stored in
the Allowed no. when phone locked location.
1 At the start screen, select Menu > Settings > Security settings.
2 Enter the lock code and press OK. (See “Lock code” on page 63.)
3 Select Allowed no. when phone locked > Assign.
4 Enter the phone number or press Search to recall the number from the phone
book, and press OK.