Filter
Top Products
64 Copyright © 2004 Nokia
Lock pictures
You can lock the Pictures menu in your phone to prevent others from accessing
this menu or viewing your stored pictures.
At the start screen, select Menu > Settings > Security settings > Lock pictures >
On or Off.
With picture lock enabled, you are now required to enter your lock code in order to
access the Pictures menu. (See “Lock code” on page 63 for more information.)
Reset camera
A token ID is sent to your phone the first time you send a picture mail (or upload a
picture in another way). The token ID prevents you from having to enter your
password each time you upload a picture. If you choose to reset the camera, you
will be required to enter your password before uploading a picture.
Contact your wireless service provider for more information about your password.
At the start screen, select Menu > Settings > Security settings > Reset camera.
Voice privacy
Voice privacy is a network service. See “Network services” on page 3 for more
information. If your wireless service provider supports this feature, the voice
privacy feature protects the privacy of your current phone conversation from other
callers placing phone calls on your same network.
At the start screen, select Menu > Settings > Security settings > Voice privacy >
On or Off.
• NETWORK SERVICES
The following features are network services. See “Network services” on page 3 for
more information.
Store a feature code
1 At the start screen, select Menu > Settings > Network services > Network
feature setting.
2 Enter the feature code from your service provider (for example, *633 for
activating Call forwarding) and press OK.
3 Press Select when Call forwarding is displayed.
4 Scroll to the type of forwarding that matches the feature code you entered (for
example, Call forwarding), press Select, then press Activate.
The activated feature code is now stored in your phone, and you are returned to
the Feature code field. Continue entering other feature codes (for example, *633
to cancel Forward if busy), or press the End key to return to the start screen.
Note: Once you enter a network feature code successfully the feature
becomes visible in the Network services menu.