Filter
Top Products
Advanced calling features
Nokia 6560 User Guide
45 Copyright © 2004 Nokia
• SELECT A PHONE NUMBER
Your service provider programs your phone number and system information into your
phone memory when your phone is first activated. Your phone can hold up to three
numbers. This means that your phone can be activated in three different service areas.
Each service area would assign a different phone number or account to your phone.
You must select a phone number for your home system. Only one phone number
can be active at a time. If you travel outside your home system, you can choose
another number. One phone number is usually enough if your service provider has
service or roaming agreements for each area in which you wish to use your phone.
Contact your service provider for details.
You need at least one active number to make calls. You cannot change from one
phone number to another during a call.
Note: Phone number selection is a network dependent feature. Some
networks may not support more than one number. Contact your service
provider for availability and full details.
Select the phone number
1 From the menu, select Menu > Settings > Network services > Own
number selection.
2 Scroll to the phone number you want to use and press Select.
• SET TOUCH TONES
Touch tones (or DTMF tones) are sounds that are produced when you press the keys
on your phone keypad. You can use touch tones for many automated over-the-phone
services such as checking bank balances and airline schedules and using your voice
mailbox. Touch tones can be sent only when a call is active.
Warning: If you send touch tones while in the analog mode, be careful not
to send confidential information.
Set manual touch tones
1 From the menu, select Settings > Phone settings > Touch tones > Manual
touch tones.
2 Select one of the following options, and then press Select:
Continuous—The tone sounds as long as you press and hold the key.
Fixed—Sets the length of touch tones to Short.
Off—Turns off the tones. No tones are sent when you press a key.
Set length
You can set the length of each touch tone when you are in analog mode.
From the menu, select Settings > Phone settings > Touch tones > Touch tone
length > Short or Long.