Filter
Top Products
Section 2A: Your Sprint PCS Vision Phone The Basics 20
Using the Desktop Charger
To use the desktop charger provided with your phone:
1. Install the phone battery in the phone.
2. Plug the prongs of the adapter into an electrical outlet.
3. Plug the round end of the AC
adapter into the desktop
charger and insert the phone
into the charger slot.
– or –
Plug the adapter directly into
the charger jack on the phone,
if the charger stand is not used. (If the phone is on, the screen
briefly displays a “Charging” message followed immediately by a
scrolling battery strength indicator. If the phone is off, the screen
displays “Phone off. Battery charging”.)
4. When the battery is fully charged, unplug the phone from the
charger. (If the phone is on, the battery strength indicator
stops scrolling. If the phone is off, the screen displays “Phone
off. Charge completed”.)
With the Sprint-approved LiIon battery, you can recharge the battery
before it becomes completely run down.
Connecting Accessories
Headset accessories can be connected
using the Nokia Pop-Port connector. With
a headset and the keypad of your phone,
you can make and answer calls as usual.
Warning!
Unplug the charger from the electrical plug and the device when not in
use. Do not leave the battery connected to the charger. Overcharging
may shorten its lifetime. If left unused, a fully charged battery will lose
its charge over time. Temperature extremes can affect the ability of
your battery to charge.