Filter
Top Products
To create a new server profile, select
Options > Server profiles >
Options > New server profile.
You may receive these settings from
your service provider in a configuration
message. If not, define the following:
Server name — Enter a name for the
configuration server.
Server ID — Enter the unique ID to
identify the configuration server.
Server password — Enter a password
to identify your device to the server.
Access point — Select the access point
to use for the connection, or create a
new access point. You can also choose
to be asked for the access point every
time you start a connection. This setting
is available only if you have selected
Internet as the bearer type.
Host address — Enter the web address
of the configuration server.
Port — Enter the port number of the
server.
User name and Password — Enter your
user ID and password for the
configuration server.
Allow configuration — Select Yes to
allow the server to initiate a
configuration session.
Auto-accept all requests — Select Yes
if you do not want the server to ask for
your confirmation when it initiates a
configuration session.
Network authentication — Select
whether to use http authentication.
Network user name and Network
password — Enter your user ID and
password for the http authentication.
This setting is available only if you have
selected Network authentication to
be used.
To connect to the server and receive
configuration settings for your device,
select Options > Start configuration.
To view the configuration log of the
selected profile, select Options > View
log.
To update the device software over the
air, select Options > Check for
updates. The update does not erase
your settings. When you receive the
update package on your device, follow
the instructions on the display. Your
Data management 99
© 2010 Nokia. All rights reserved.