Panasonic 6275I Cell Phone User Manual


 
Set up your phone
8
2. Push down on the other end of the
battery to snap the battery into
place.
Replace the back cover
1. Set the back cover on the phone
with the cover tabs aligned to the
slots in the phone.
2. Press the back cover latch down,
and slide the back cover toward the
top of phone.
3. Make sure back cover latch is
secure.
Charge the battery
1. Plug the charger transformer into a
standard wall outlet.
2. Connect the charger to the phone.
If necessary, you can use a CA-44
adapter cable (1) to connect a
charger and the phone.
After a few seconds, the battery
indicator in the display scrolls.
If the battery is completely
discharged, it may take a few
minutes before the charging
indicator appears on the display or
before any calls can be made.
Turn your phone on
or off
1. To turn your phone on or off,
press and hold the end key for at
least 3 seconds.
2. Enter the lock code, if necessary,
and select OK.
9251758_6275i_1_en_au_oth_v1.0.fm Page 8 Tuesday, August 22, 2006 10:24 PM