Filter
Top Products
Settings
48
Date
Select Menu > Settings > Time and
date > Date > Show date or Hide date,
Set the date, Date format, or Date
separator.
Date and time auto-update
Auto-update is a network service.
See “Network services”, p. viii. If your
network operator supports this feature,
you can allow the digital network to
set the clock, which is useful when you
travel to another network or time zone.
Select Menu > Settings > Time and
date > Auto-update of time > On,
Confirm first, or Off.
If you use the Auto-update of time
option while outside the digital
network, you may be prompted to
enter the time manually. Network time
replaces the time and date when you
reenter your digital network.
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged,
and you are still outside of the digital
network).
■ Call settings
Anykey answer
Anykey answer enables you to answer
an incoming call. Briefly press any key
except the right selection or end key.
In standby mode, select Menu >
Settings > Call > Anykey answer > On
or Off.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial. With
automatic redial activated, your device
redials the number (number of times is
specified by the network), and notifies
you when the network is available.
In standby mode, select Menu >
Settings > Call > Automatic redial >
On or Off.
Speed dials
You can activate or deactivate Speed
dials. In standby mode, select Menu >
Settings > Call > Speed dials > On or
Off.
Calling cards
If you use a calling card for long
distance calls, save the calling card
number in your phone. The phone can
store up to four calling cards. Contact
your calling card company for more
information.
9251758_6275i_1_en_au_oth_v1.0.fm Page 48 Tuesday, August 22, 2006 10:24 PM