Filter
Top Products
Messages
27
1. Select Menu > Messaging > Voice
messages > Voice mailbox no.. The
voice mailbox number is displayed.
2. If the box is empty, enter the voice
mailbox area code and number,
and select OK.
Set up voice mail
1. After you save the voice mailbox
number, in standby mode,
press and hold 1.
2. When you connect to voice mail,
and the prerecorded greeting
begins, follow the automated
instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in standby
mode, press and hold 1; or select
Menu >Messaging > Voice
messages >Listen to voice msgs. to
dial the voice mailbox number.
When you connect and the
prerecorded greeting begins,
follow the automated instructions to
listen to your voice messages.
Automate voice mail
Voice mail services vary by network
operator. The following instructions
are examples of common operations.
Please check with your network
operator for specific instructions on
using your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However,
it should look similar to the
following:
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds,
press 1234, and press #.
Phone numbers with dialling
codes
You can insert special characters called
dialling codes into phone numbers
such as voice mail, and save the
number to a speed dialling location.
Dialling codes instruct the receiving
system to pause, wait, bypass,
or accept the numbers that follow
them in the dialling string. To set up
dialling codes, do the following:
1. Select Menu > Contacts > Speed
dials.
2. Scroll to an (empty) speed dialling
slot, and select Assign.
3. Enter your mailbox phone number.
4. Enter any dialling codes as
necessary after the entered phone
number.
9251758_6275i_1_en_au_oth_v1.0.fm Page 27 Tuesday, August 22, 2006 10:24 PM