Filter
Top Products
Base Unit Settings
140 For assistance, please visit http://www.panasonic.com/help
5 Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LThe settings under the Network Connection heading display the network information for
the Internet connection on WAN side. See the Network Status page on page 175 for
detail.
LThe settings under the Wireless Information heading display the wireless network
information for the handset and wireless devices connected to the base unit. See the
Wireless Status page on page 179 for detail.
LIf you click [View], the current network key is displayed. You may need this information
when you set up your wireless devices.
WPA-PSK/WPA2-PSK Settings
[Network Key] LEnter the network key (8 – 63 alphanumeric characters) in
this data field.
LPress [View] to display the network key.
[Data Encryption] LSelect the desired data encryption method.
For WPA-PSK
LIf your wireless devices use TKIP, select [TKIP] or
[TKIP+AES].
LIf your wireless devices use AES, select [TKIP+AES].
For WPA2-PSK
LIf your wireless devices use TKIP, select [TKIP+AES].
LIf your wireless devices use AES, select [AES] or
[TKIP+AES].
[Session-Key
renewal interval]
LSet the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week. The default is set to 1800.
Setting Description
WP1050.book Page 140 Wednesday, November 22, 2006 9:24 AM