Filter
Top Products
Getting Started
72 For assistance, please visit http://www.panasonic.com/help
Setting the time and date
Set the correct time and date before you start using the handset. The time zone and the
daylight saving need to be set first before setting the time.
1 {Menu} (middle soft key)
2 “Settings” i {Select}
3 “Time and Date” i {Select}
4 Select the desired setting. i {Select}
Note:
LIf you make a mistake when entering the time and date, press {<} or {>} to move the
cursor, then make the correction.
LChanging “Time zone” and “Daylight saving” sets the displayed time forward or
backward. When you set the time and date for the first time, set the time after all the
other time and date settings.
LWhen the time setting is reset to an initial condition by removing the battery or for some
other reasons, the time is displayed as “12:00 AM” and it stops.
Time zone Select the desired time zone. i {Select}
Daylight saving Select “Standard” or “Daylight saving”. i
{Select}
“Daylight saving” adds 1 hour to the time setting of
“Standard”.
Time Enter the current hour and minute (12-hour clock
format) by selecting 2 digits for each. Press {*} to
select “AM” or “PM”. i {OK}
Date Enter the current month, day and year by selecting 2
digits for month and day, and 4 digits for year. i {OK}
LDate can be set from 01/01/2006 to 12/31/2030.
Date format Select the desired format. i {Select}
WP1050.book Page 72 Wednesday, November 22, 2006 9:24 AM