Filter
Top Products
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help 157
4 Configure the settings under the Port Forwarding Setting heading. Click [Add] to add
a new entry.
5 Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LTo edit the setting:
1 Click the desired entry number in step 3.
2 Edit the items in the Port Forwarding Setting page.
3 Click [Save].
4 Click [Restart].
LTo delete the setting:
1 Click the desired entry number in step 3.
2 Click [Delete] in the Port Forwarding Setting page.
3 Click [OK] in the confirmation dialog box.
4 Click [Restart].
Setting Description
[No.] LSelect the desired entry number for the port forwarding
setting.
LEntry number represents the priority. Entry number 1 has the
highest priority.
[Status/Port
Forwarding]
LSelect whether to enable or disable the port forwarding
feature.
[Forwarding IP
Address]
LEnter the IP address of the computer that is hosting the
service.
LThe device registered as the forwarding IP address can be
accessed from the Internet through the registered protocol
and port.
[Protocol] L Select the desired protocol used to access your hosting
service from TCP/UDP/TCP&UDP/ESP/GRE.
[Port] LEnter the forwarding port number when you select the
protocol from TCP/UDP/TCP&UDP.
LIf you want to set one port, enter its port number only.
LIf you want to set a range of ports, enter the port numbers in
the following way: “2000 – 3000”
WP1050.book Page 157 Wednesday, November 22, 2006 9:24 AM