Panasonic KX WP1050 Cell Phone User Manual


 
Introduction
For assistance, please visit http://www.panasonic.com/help 9
15. Do not use the units on airplanes, in hospitals, or in other locations where wireless LAN
signals may affect the operation of devices in the vicinity.
LAbide by instructions regarding use in airplanes and hospitals.
SAVE THESE INSTRUCTIONS
WARNING:
LTo prevent the risk of fire or electrical shock, do not expose the product to rain or any
type of moisture.
LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke
has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800-
211-7262).
CAUTION:
Installation
LDo not touch the plug with wet hands.
LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is
installed near the product and is easily accessible.
LIt is necessary to use the proper AC cord. See page 17.
Battery
To reduce the risk of fire or injury to persons, read and follow these instructions.
LUse only the battery(ies) specified.
LDo not dispose of the battery(ies) in a fire. They may explode. Check with local waste
management codes for special disposal instructions.
LDo not open or mutilate the battery(ies). Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.
LExercise care when handling the battery(ies). Do not allow conductive materials such as
rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the
battery(ies) and/or the conductive material to overheat and cause burns.
LCharge the battery(ies) provided, or identified for use with the product only, in
accordance with the instructions and limitations specified in this manual.
Medical:
LConsult the manufacturer of any personal medical devices, such as pacemakers or
hearing aids, to determine if they are adequately shielded from external RF (radio
frequency) energy. (The product operates in the frequency range of 2.412 GHz to 2.462
GHz, and the power output is 30 mW.) Do not use the product in health care facilities if
any regulations posted in the area instruct you not to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external RF energy.
WP1050.book Page 9 Wednesday, November 22, 2006 9:24 AM