Filter
Top Products
10 Getting Started
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll;
it takes around 2.5 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use,
talktime and stand-by time can go up to 8.5 hours*
and 30 days* respectively.
*Depending on the network conditions, user settings,
method of use, etc the actual results may differ.
Keeping the charger plugged to the mobile phone when
the battery is fully charged will not damage the
battery. The only way to turn off the charger is to
unplug it, so it is advisable to use an easily accessible
AC power socket.
If you do not intend to use your phone for several days,
we recommend that you remove the battery.
You can use the phone while it is charging (note that
the vibra alert goes off when the charger is connected).
If the battery is completely flat, the battery icon will
only reappear after a few minutes of charging.
Setting Hotkeys
You can configure the numeric keys 2 - 9 to
access your favourite features. Once they have been
set, you can simply long press on the numeric key
to access the corresponding features.
Majority of the hotkeys have been preset and
configured. To check the hotkey settings, go to
Menu > Settings > Shortcuts > Hotkey. For more
information, see “Shortcuts” on page 73.
Philips_XRazr.book Page 10 Friday, March 23, 2007 6:46 PM