Filter
Top Products
Initial start up procedure
13
Charging the battery
A charger is supplied with the phone, in the box.
The
b
symbol indicates the state of charge:
• During charging the 4 charge indicators change. If the first bar is dark, the battery already has
a 25% charge.
• The bars darken one after another during charging.
• When all 4 bars are dark the battery is fully charged. A minimum of 2 hours charging is
required to obtain a 90% charge with a Vibra battery (capacity: 1200 mAh) and 1.5 hours
with the slim battery (capacity: 800 mAh). For the maximum charge continue charging.
• When the battery is charged, press the release button to the topside of the connector to
remove it. In order to save battery capacity you shouldn't wait for an empty battery capacity
to charge it again.
L
NOTES:
1. You can turn your phone on and use it while it is charging.
2. The only way to turn the battery charger off is to unplug it from the mains outlet; for this reason use a mains
outlet with easy access.
3. You can connect the charger to an IT supply (Belgium only).
4. If the battery is completely flat, the battery icon will only reappear after 2 or 3 minutes of charging.
5. If you attempt to charge your phone with an invalid charger, your phone will refuse the charge. This will be
signified by:
- the flashing of the backlight every second
- the flashing of the battery fixed icon
- a continuous alert beep
- a message
Acessory not compatible. Please unplug
displayed on the
screen.
This measure is designed to protect your phone. For best results, always use a Philips Authentic Accessory.
• Clip the battery on the phone.
• Plug the charger into the phone connector.
• Plug the transformer unit into a mains AC power socket.