Filter
Top Products
Use of network services
49
Conference Call
The user can activate the conference call by making consecutive outgoing calls, or create it
from a multiparty call context. The user may have up to five members at the same time. He can
endd the conference with . At this point all calls are disconnected.
When making consecutive outgoing calls, first initiate a normal call with the first number of the
conference. Then when the first member is on line, initiate a second call as described in making
a second call paragraph page 47.
When the second call is engaged, press the Pilot Key and select
.
Repeat the above
process up to five members.
If there is an incoming call during the conference call, and if there is less than the five members,
by pressing the Pilot key :
You can accept the second call as described in paragraph answering a second call page 47, and
by pressing the Pilot key and selecting you can add this member to the conference
call.
If there is an incoming call during a conference and if five members are already connected, the
incoming call is automatically rejected with a user Busy notification (there is no ringing screen).
In-call symbols
During calls, you have the following symbols:
Mute
Call underway
Active call placed on
hold
Incoming call
Outgoing call
Conference
Conference