Polycom 8002 Cell Phone User Manual


 
PN: 1725-36034-001_C.doc 11
SpectraLink Wireless Telephone
Overview
SpectraLink 8002 Wireless Telephones are mobile handsets for
workplace IP telephone systems. The handsets operate over an
802.11b wireless Ethernet LAN providing users a wireless voice over
IP (VoIP) extension. By seamlessly integrating into a SIP environment,
handset users are provided with high-quality mobile voice
communications throughout the workplace. The handset gives users
the freedom to roam throughout the workplace while providing all
the features and functionality of a SIP desk phone.
The handsets reside on the wireless LAN with other wireless devices
using direct sequence spread spectrum (DSSS) radio technology.
Access points that transmit these signals must use WMM for QoS. The
handset radio transmits and receives packets at up to 11 Mb/s.
In the SIP environment, the handsets support up to three proxy
servers. Each handset may have five line appearances and two calls
per line. If required, each handset may have multiple sets of
credentials to identify itself by current user.
The latest software versions are required to support the features
described in this document.
WMM-Compatible Access Points
SpectraLink 8002 Wireless Telephones support basic WMM™ as part
of the 802.11e protocol. The handset requires an AP that supports
WMM.
The WMM specification for the SpectraLink 8002 Wireless Telephone
does not accommodate admission control. The AP may not use the
mechanism of admission control in the wireless environment where
SpectraLink 8002 Wireless Telephones are operating.
1