Polycom 8002 Cell Phone User Manual


 
SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
22 PN: 1725-36034-001_C.doc
The Admin (Administration) Menu
The Admin menu contains configuration options that are stored
locally (on each handset). Each handset is independent, and if the
default settings are not desired, the Admin menu options must be set
in each handset requiring different settings.
Opening the Admin menu
1. With the handset powered off, press and hold the Power Off key.
While holding the
Power Off key, press and release the Power On
key.
2. The Admin menu displays.
If an Admin password has been set, the display will require its entry
before opening the Admin menu. The default password is 123456. If
no password is set, the display will proceed directly into the Admin
menu.
Entering and editing Admin menu options
An asterisk (*) next to an option on the display indicates that it is
selected. Use the
Up, Down, and Select side buttons and the softkeys to
navigate and select:
Up/Down button:
Display previous/next menu item.
Select button:
Selects the menu item or option.
OK softkey:
Selects the menu item or option.
Save softkey:
Saves the entry.
Bksp softkey:
Backspaces to allow editing of entry.
Cncl softkey:
Cancels edit and returns to previous menu level.
Up softkey:
Returns to previous menu level.
Exit softkey:
Exits the menu (at the top level).
End Call key:
Exits to standby mode (from any level)
Alphanumeric string entry
1. Press the first digit/letter. The digit displays. Press the key again
to scroll through the letters associated with that key.