Filter
Top Products
Using the SIP Handset
PN: 1725-36034-001_C.doc 69
If you want to… Then…
Listen to voicemail
When any proxy has outstanding messages, the voicemail icon will display.
The
LINE menu will display a plus (+) indication when there is a new
voicemail for that line. Indications are cleared when the handset receives
notification that all new voicemail messages have been read.
1 Press START and dial the number assigned to message retrieval and
press START again.
2 Follow system instructions to retrieve messages.
Alternately, if a PROXYn_MAIL_ACCESS value has been configured for the
corresponding proxy, the voicemail system can also be accessed by
pressing the Msg softkey, which will appear after selecting a line and before
beginning to dial.
Do Not Disturb
(reject all incoming calls)
Press FCN 2. The handset will not ring for new incoming calls.
When the do-not-disturb feature is enabled, the standby screen will display
Do Not Disturb
.
Clear Do Not Disturb
Press FCN 2 again to resume ringing for new incoming calls.
Redial the last number
you dialed
1 Press START.
2 Press Redl.
3 Verify that the displayed number is the one you want and the line # is
valid.
4 Press START.
Activate a registered OAI
function on an OAI
server
1 Press START.
2 Press FCN.
3 Navigate to desired OAI function using Up and Down buttons.
4 Select the OAI function using the Select button or shortcut key.
Silence while ringing
Press
the END key to silence the ring.
Adjust the
headset volume
While the headset is plugged in, press the up/down volume buttons on the
side of the handset during the call.
End the call
Press the
END key to return to the standby mode.
Turn on the backlight
The backlight comes on when any key is pressed or when there is an
incoming call, and stays on for 10 seconds. It turns off if another key is not
pressed for 10 seconds.