Filter
Top Products
4544
S o u n d s
Alerts Menu 3-3
Minute Beep: With this menu option set to ON, the
phone sounds an alert 10 seconds before
each elapsed minute to remind you of
the length of the current call.
Service Alert: With this menu option set to ON, the
phone beeps when you exit service area
or when you return to a service area.
Connect: You can set your phone to sound the connect
tone when your call is connected to the
system.
Disconnect: You can set your phone to sound the
connect tone when a call is disconnected
or dropped.
Alarm Menu 3-4
The option allows you to set the alarm to ring at a
specific time.
To set the alarm, proceed as follows.
1. Select Set option.
2. Choose the alarm frequency option, and press the
key.
Daily: the alarm rings every day at the same time.
One Time: the alarm rings only once and is then
deactivated.
S o u n d s
VIBRATE: The phone vibrates but does not ring.
VIB+BELL: The phone vibrates and rings simultaneously.
Ring Tone
This option allows you to select the required ringing tone.
You can choose among 19 different tones or melodies.
Each time you select a tone, it sounds for a few seconds.
Data/Fax Alert
This option allows you to be alerted with a distinct
ringing tone when you are faxed or received a data
through the phone (network dependent). You can choose
between 19 different tones or melodies. Each time you
select a tone, it sounds for a few seconds.
Key Volume Menu 3-2
This option allows you to adjust the tone volume that the
keypad generates when you press a key.
Use or keys on the left side of the phone.
You can also use or keys on the left side of the
phone to adjust key volume in Standby mode.