Filter
Top Products
8
3.
Plug the travel adapter power plug into a standard AC wall outlet.
4. When the battery is fully charged, the phone displays a message telling you
the battery is full. Remove the connector from the phone.
Note:
Failure to unplug the wall charger before you remove the battery can cause damage to the
phone.
Warning!:
If your handset has a touch screen display, please note that a touch screen responds
best to a light touch from the pad of your finger. Using excessive force when pressing on
the touch screen may damage the tempered glass surface and void the warranty.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, the battery
icon ( ) blinks and the device sounds a warning tone at regular intervals. In
this condition, your phone conserves its remaining battery power, not by turning off
the backlight, but by entering the dimming mode. For a quick check of your battery
level, glance at the battery charge indicator located in the upper-right corner of your
device’s display. Five bars ( ) indicate a full charge.
When the battery level becomes too low, the phone automatically turns off.
Switching the Phone On or Off
1. To turn on, press and hold until the phone switches on. The phone
launches the activation splash screen and searches for the network. Once the
network is found, you can make or receive calls.
2. To turn off, press and hold until the phone switches off.
Locking the Touch Screen
1. Press the Lock Key on the upper right side of the phone to lock the
touch screen.
PWR
END
PWR
END
T528G.book Page 8 Thursday, January 27, 2011 8:15 PM