Filter
Top Products
126
3.
Touch a representative city from a desired area. If the correct city area is then
highlighted in a different color, your selection was accurately read and you
can touch
OK
.
– or –
If not read correctly, repeat the previous two steps until your selection is
correct.
4. Touch the sun symbol next to the time to add (
On
) or remove (
Off
) Daylight
Savings Time.
Timer
You can use this feature to set a countdown timer. Use a timer to count down to an
event based on a preset time length of hours, minutes, and seconds.
1. Touch ➔
Tools
➔
Timer
.
2. Select a countdown time length for the alert by setting the hours, minutes,
and seconds value.
Enter a time length by using either the
+
or
-
buttons or by quickly sliding
your fingertip over the numbers.
Note:
Touching and holding down the + and - keys increases the speed at which the numbers
scroll through each reel.
3. Touch
Start
to begin the timer and touch
Stop
to pause the timer.
4. Touch
Reset
to clear the current timer and display the Timer set screen.
Menu
T528G.book Page 126 Thursday, January 27, 2011 8:15 PM