Filter
Top Products
Getting Started
20
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
Note
: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
When the battery level gets too low, the phone
turns off automatically.
Getting Started
21
Switching the Phone On or Off
1. Open the folder.
2. Hold down the key until the phone
switches on.
3. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
“00000000” at the factory. For further details,
see page 130.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 131.
The phone searches for your network and after
finding it, the idle screen, illustrated below,
appears on the display. Now, you can make or
receive a call.
Note
: The display language is preset to English at
the factory. To change the language, use
the
Language
menu option (
Menu 5.4
).
For further details, see page 91.
5. When you wish to switch the phone off, hold
down the key until the power-off image
displays.
Menu Name