Filter
Top Products
Funbox
122
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the address.
Erase: deletes the address.
http://
(Menu 8.2.3)
This menu option allows you to manually enter a
URL address of the Web site that you wish to
access. You can access this menu directly by
pressing and holding the
key while using the
WAP Browser.
For further details about entering text, see page 41.
Settings
(Menu 8.2.4)
You can set up five proxy servers for the WAP
Browser. Contact your service provider for details.
For each server, the following options are available:
Profile Name: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: enter the address of your startup
homepage. When the default homepage displays,
you can delete it using the C key and enter your
own choice.
Security: set the data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
IP Address: enter the WAP gateway address
required to connect to the Internet.
Funbox
123
Bearer: select the bearer to be used for each type
of network address accessed; GPRS or Data. The
remaining options depend on the Bearer setting.
When the bearer is set to GPRS:
User Name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server’s dial-up
number.
Data Call Type: select a data call type from
Analogue or ISDN.
Note
: The WAP Browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear Cache
(Menu 8.2.5)
You can clear the information stored in the cache,
which is the phone’s temporary memory used to
store the most recently accessed Web pages.