Filter
Top Products
Options During a Call
48
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example
: You wish to say something to another
person in the room but do not want the
other person to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the key to highlight the
Mute option.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the key to highlight the
Unmute option.
3. Press the OK soft key.
The other person can hear you again.
Options During a Call
49
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute Keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
Note:
To communicate with answering machines or
computerised telephone systems, the
Send
Keys
option must be selected.
Sending DTMF Tones
You can send the DTMF (dual tone multi-frequency)
tones corresponding to a number entered during a
call.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the key to highlight the Send DTMF
option.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.