Filter
Top Products
Phonebook
38
Setting Up Speed-dial Entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed Dial by pressing the or
key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialling number, from the 2 to 9 key, and
press the OK soft key.
Note
: If you have already assigned a number to
the key, the
Options
soft key replaces the
OK
soft key. Go to Step 6.
4. Select a Phonebook entry from the list and press
the View soft key.
5. Select a number, if the entry has more than one
number, by pressing the or key and
press the Select soft key.
6. Once you have assigned a number to the
selected key, you can use the following options
by pressing the Options soft key:
• Change: allows you to assign a different
number to the key.
• Erase: allows you to clear the setting so that
no number is assigned to the key.
• Erase All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
• Number: allows you to view the number
assigned to the key.
7. When you finish setting the options, press the C
or key.
Phonebook
39
Speed-dialling from Phonebook
To speed-dial the numbers assigned to keys 2 to 9,
press and hold the appropriate key.
Note
: Memory location 1 is reserved for your Voice Mail
server number.
Deleting All of the Phonebook Entries
You can delete all of entries in the selected memory
or both memories.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Delete All by pressing the or
key and press the Select soft key.
3. To place a check mark by the memory you want
to empty, All, Card Memory, or Phone Memory,
press the Mark soft key.
4. You can remove the check mark by pressing the
Unmark soft key.
5. When you are finished marking, press the Delete
soft key to delete the entries in the selected
memory.
6. Enter the phone password and press the OK
soft
key.
Note
: The password is preset to “00000000” at the
factory. To change it, see page 92.
7. When the confirming message appears, press the
Yes soft key.
To cancel the deletion, press the
No soft key.