Sanyo SCP-7050 Cell Phone User Manual


 
Answering Calls
To answer an incoming call with the phone open:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press or to answer an incoming call. (Depending
on your phone’s settings,you may also answer incoming calls
by pressing any number key. See “Setting Any Key Answer” on
page 45 for more information.)
To answer an incoming call with the phone closed:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. When your phone rings or vibrates, press and hold on the
right side of the phone. (The call will be answered in
speakerphone mode.)
– or –
Open the phone to use the earpiece.
Note: If the Open menu of the Open/Close Flip feature is set to
No Action, opening the phone will not answer the call. (See “Setting the
Open/Close Flip Option” on page 46.)
Your phone notifies you of incoming calls in the following ways:
The phone rings and/or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts, the Contacts entry’s
name is displayed.
The following options are also displayed by pressing
(right softkey).
Note: If you set the Open menu of the Open/Close Flip feature to
Answer Call, and if you open the phone when you receive a call, the
options below are not available.
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Options
16