Filter
Top Products
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use
either of the following abbreviated dialing features.
ⅷ
Ph. Book Match to retrieve any desired number saved in your
Contacts by entering only the last three to six digits of the
number. This feature becomes available when you enable
Abbreviated Dialing feature. (See “Setting Abbreviated
Dialing” on page 47.)
ⅷ
Prepend to predefine the first five- or six-digit prefix you wish
to use for abbreviated dialing, so that you can dial a number by
entering only the last four or five digits of the number. This
feature becomes available when you enable Abbreviated
Dialing feature. (See “Setting Abbreviated Dialing” on
page 47.)
To place a call using Ph. Book Match abbreviated dialing:
1. Enter the last 3-6 digits of a Contacts entry’s phone number
saved in your Contacts.
2. Press or .
To place a call using Prepend abbreviated dialing:
1. Enter the last four or five digits of your desired number.
2. Press or .
Note: If the digits match more than one entry, the Abbrev. Dial list will
be displayed; select the correct entry and press again.
When
Prepend is set to Enable and Ph. Book Match is set to
Disable, you can display the 10-digit number (including the
predefined prepend number) by entering the last four or five digits
of the number.
When both
Ph. Book Match and Prepend are set to Enable and
your desired number is not saved in
Contacts, you can display
the 10-digit number (including the five- or six-digit prepend
number) by entering the last four or five digits of the number.
Tip: You can also place a call by pressing (right softkey) and
select Abbrev. Dial after step 1 above.
Options
24