Filter
Top Products
Using Different Dialing Methods
PrependDialing
Prepend dialing allows you to alter a phone number in your
Phone Book by adding additional numbers. For example, if your
internal Phone Book entry was entered without an area code
and you are out of town, you can prepend that entry with the
appropriate area code.
1. Highlight the phone number stored in Phone Book entry
or call history using one of the previously described
methods.
2. Press (right softkey) to display the menu options.
3. Highlight Prepend and press .
4. Enter the digits you want to prepend.
5. Press .
– or –
Press to display the menu options, highlight Call,and
press .
Using Speed Dial
With this feature you can dial internal Phone Book entries with
one key press for locations 2-9. Save your memory locations 2-9
for speed dialing or your most commonly used phone numbers.
Speed Dial numbers must be stored in your Phone Book to use
this feature.
To store a Speed Dial number:
1. Press on the Navigation key.
2. Highlight your desired entry by scrolling through the
phone book list and press .
3. Highlight the phone number you want to set as a Speed
Dial, and press (right softkey).
4. Highlight Set Speed Dial and press .
5. Highlight an unassigned number and press .
– or –
Options
Options
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 89
Storing Special Numbers in the Phone Book
Using the Pause Feature
Generally, when you call an automated system like voicemail boxes
or credit card companies, you are required to enter a password or
calling card number. Rather than entering the numbers manually
each time, you can store the numbers in your internal Phone Book,
separated by special characters called “pauses”.
Using Two Different Types of Pauses
There are two different types of pauses that you can use when
storing a number in your internal Phone Book.
ᮣ
Hard Pause causes the phone to stop dialing until you select
Send Tone or press . To display Send Tone, press ,
highlight Send Tone and press .
ᮣ
2-Sec. Pause waits two seconds before sending the next string
of digits.
To insert pauses into a number:
1. Enter the number you want to dial.
2. Press to display the menu options.
3. Highlight:
ᮣ
Hard Pause for a hard pause.
ᮣ
2-Sec. Pause for a timed pause.
ᮣ
Hyphen for a hyphen (see following section).
4. Press to insert a pause or manual hyphen.
5. Finish entering the rest of the numbers, then dial or save
the entered number. See page 25 for saving.
Using Hyphens
You can add hyphens to your internal Phone Book numbers,
however they are mainly for show. You can insert hyphens
manually where you like, or choose automatic hyphenation,
which inserts hyphens according to the North American
Numbering Plan. Entering a manual hyphen suspends any
automatic hyphenation for that number.
Section 2: Understanding Your Phone
88 2G: Using the Internal Phone Book