Filter
Top Products
16
NWZ-A826/A826K/A828/A828K/A829
4-7-1. Bluetooth address setting
Bluetooth address is set.
If the test mode is released, the address set in this mode becomes
invalid.
Note: Not used for the servicing.
4-7-2. Bluetooth transmitting power setting
Bluetooth transmitting power is set.
If the test mode is released, the transmitting power set in this mode
becomes invalid.
Note: Not used for the servicing.
4-7-3. Bluetooth transmitting power setting
Bluetooth transmitting power is set.
If the test mode is released, the transmitting power set in this mode
becomes invalid.
Note: Not used for the servicing.
4-7-4. Bluetooth connection check
It connects with the address selected by “SETADR" with the chan-
nel set by “SETCH", and the result is displayed.
Note: Not used for the servicing.
4-8. Shutdown
Function that power supply of set can be turned off without ending
static test mode.
Procedure:
1. Enter the test mode.
2. Press the [
v
]/[
V
] key to select the “SHUTDOWN”, and press
the [
B
] key to select the “SURE ?”.
3. Press the [
u
] key, turn the power off while having entered the
test mode.