Filter
Top Products
P800/P802
White Paper, January 2003
76
Personalisation and Customisation
The P800 may be personalised by the user and customised at the factory:
• By the User (via the UI, including interactive M-Services).
• By the User via PC-based utility applications.
•
Via Over The Air (OTA) configuration, initiated by operator, user or IT helpdesk.
• In the factory or at a Sony Ericsson Service Point, on behalf of a mobile operator.
User Personalisation
Wallpaper and Application Shortcuts
The user may set a static image to be the background
‘wallpaper’ for the FC standby screen. Image size is 208 x
144 pixels and formats JPEG, GIF, BMP, WBMP, MBM and
PNG are supported. Larger images, for example, a
640x480 picture from the CommuniCam, will be resized to
fit.
Wallpaper images may be selected from internal or Memory
Stick storage. They can also be downloaded via M-
Services, beamed in to the P800 using Bluetooth or
Infrared, or transferred in over the PC link.
The application shortcut buttons may be personalised by
the user. They will disappear after a short period to reveal
more of the wallpaper image. Rotating the Jog Dial will
redisplay them. They user may switch them on all the time.
Wallpaper is set in Control Panel, Display. A useful shortcut
is to tap the battery icon
in the FO Status Bar and
select Settings. Wallpaper can also be set directly from a
received MMS message.
Screen Saver
A ‘screen saver’ image is displayed after a period of
inactivity. The user can switch this facility on and off and
select the delay period before the screen saver is
displayed. Image size is 208 x 320 and format is the same
as the Wallpaper image above, with the addition of support
for animated GIF. Note that use of animated GIF increases
power consumption. The top part of the image is displayed
in FC mode and the entire image is displayed in FO mode.
Device lock may be used in combination with the screen
saver. Upon pressing a button or touching the screen, the
user will be prompted to activate keys and/or enter the
device lock code.
When the screen saver or screen blanker is deactivated,
the P800 will revert to the state it was in before the screen
saver was activated.