Filter
Top Products
N
o
t
for
C
o
m
m
e
r
c
i
a
l
U
s
e
WAP 71
Creating a data account
1 Scroll to
Settings, Data comm., Data accounts,
Add account
.
2 Enter a name for the data account.
3 Select an access type.
4 Enter the settings that you have received from your
operator.
For GPRS: access point name (APN), user id, and
password.
For DialUp Connection: phone number, user id, and
password.
Confirm each setting.
5 Scroll to
Save?.
Entering additional settings for a data account
1 Scroll to
Settings, Data comm., Data accounts.
2 Select a data account.
3Press
Edit.
4 Select the setting you want to edit. Edit the setting.
5 Repeat step 4 for all the settings you want to edit.
Settings for GPRS
APN – the address of the external data network you want
to connect to, either an IP address or a text string.
User id – your user id to log on to the external data
network.
Password – your password to log on to the external data
network.
Passwd. request (Password request) – if this setting is
on, you are asked for a password each time you log on to
the external data network.
Allow calls – if you want to allow incoming
calls during a GPRS session, select
ON. If not,
select
OFF.
IP address – the IP address that the phone uses when
communicating with the network. If you do not enter a
value, the network provides you with a temporary IP
address.
DNS Address (Domain name server) – the name that the
server translates into a number.
Basic settings (Basic settings) – these are optional.
Consult your network operator.
Note!
Your service provider may provision your WAP
settings so they are not viewable on your phone.