Filter
Top Products
N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
Er
i
c
s
s
o
n
Mo
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
42 Setting up mobile Internet
• IP address – the IP address that the phone uses when
communicating with the network. If you do not
enter an address, the network provides you with
a temporary IP address.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
GSM settings include some settings that are
similar to GPRS settings and some which are
GSM-specific as follows:
• Phone number – the phone number of your
Internet service provider.
• Data rate – select the speed you want for the
connection.
• Dial type – select analog or ISDN connection.
Note: If you want to change access type, you have
to create a new data account and select the access
type you want to use.
To create a data account manually
1. Scroll to Connect,
YES, Data comm., YES, Data
accounts,
YES, Add account?, YES.
2. Select an access type.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
YES.
5. Scroll to Save?,
YES.
To edit a data account
1. Scroll to Connect,
YES, Data comm., YES, Data
accounts,
YES.
2. Select a data account,
YES.
3. Select Edit.
4. Select the setting you want to edit,
YES. Edit the
setting,
YES.
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
This setting is valid for all data accounts.
• To select preferred mode, scroll to Connect/Data
comm./Pref. service and select GPRS and GSM
or GSM only.
Note: To see the status of GPRS coverage and
connection, slide the volume key up or down from
standby to enter the Status menu and then scroll
to GPRS.