Filter
Top Products
SETUP
Connecting Cables
NURIT 8000 I
NSTALLATION GUIDE 25
Connecting
Cables
The NURIT 8000 has the following ports to facilitate different types of cabling
connections:
• Data Connection
• Power Supply
Figure 17 NURIT 8000 Connections
Data Connection
The data cable is an accessory which may be ordered separately.
For information on ordering an external modem for the NURIT 8000 terminal, see
Accessories and Documentation.
To connect the data
cable
1 Turn off the external device to which the base unit is to be connected and/or
the NURIT 8000 terminal.
2 Insert the plug into the data port on bottom of the unit.
3 Insert the plug at the other end, into the external device.
4 Turn on the external device and/or the NURIT 8000 terminal.
Figure 18 Possible Data Connections
POWER
CONNECTOR
DATA
CONNECTOR
CAUTION
• Turn off the POS terminal, and any peripheral devices whenever you connect or
disconnect the NURIT 8000.
• Do not disconnect the NURIT 8000 from an external device when it is processing data.
NOTE
• Peripheral devices may require special adapter cables for their connection to the
NURIT 8000. In addition, certain peripheral devices require an external power supply.
• Refer to the product documentation of the specific peripheral devices, or contact your
local VeriFone representative or service provider for further details.