ZTE Z221 Cell Phone User Manual


 
33
Settings
32
TTY Mode
Your handset is a TTY-compatible device. Simply connect
the TTY equipment to the headset jack.
1. From idle mode, select Menu > Settings > Phone
> TTY setting.
2. Select one of the following options and press the
OK Key for Select.
Full: Users who cannot talk or hear may use
this setting to send and receive text messages
through TTY equipment.
Read & talk: Users who can talk, but cannot
hear, may use this setting to talk through the
phone and receive responses via text messages.
Write & hear: Users who can hear, but cannot
talk, may use this setting to listen to the other
party and respond via text messages.
Off: Users who can hear and speak may use this
setting to disable TTY support.
HAC (Hearing Aid
Compatibility) Mode
This phone supports HAC (Hearing Aid Compatibility)
function. When you turn on the Hearing Aid Mode and
use a hearing aid with a telecoil to answer the phone,
it will help you hear more clearly while speaking on the
phone. For more detailed information on HAC, please
refer to Care and Maintenance > Turn on the HAC
Setting in this user manual.
1. From idle mode, select Menu > Settings > Phone
> T-coil setting.
2. Select On or Off and press the OK Key for Select
to confirm.
Your Z221 has been tested for hearing aid device
compatibility and has an M3/T4 rating.
PUK Codes
A PUK code is the unlock code for the SIM card. When
the SIM card is locked, you have to enter the correct
PUK code and then enter the new PIN code. The SIM
card can then be used normally.
A PUK code may be supplied with a new card.
Contact your service provider for more information.
A PUK code can only be entered 10 times in a row. If
you enter the wrong PUK code more than 10 times,
the SIM card will be locked indefinitely.
NOTE: If a PUK code is supplied with the new card,
remember to store it safely.
Fixed Dial Numbers
If you enable fixed dial numbers, you cannot dial phone
numbers that are not in the FDN list.
FDN List
The FDN list allows you to create a list of fixed dial
numbers.
Accessibility