ZTE ZTE Z667 Cell Phone User Manual


 
Tap the language field to select the language you want to use
and then tap Start.
Select a Wi-Fi network or tap Skip.
If prompted, set the date, time, and time zone. Then tap Next.
If you have a Google account or Gmail, tap Existing to sign in
to your account. Or, tap New to get an account. You can also
tap Not now to set up an account later.
Configure the Google location options and tap Next.
Enter your name, which the phone uses to personalize some
apps, and tap .
You will be prompted to accept the terms of Google service.
Tap Next to continue.
Tap Finish to complete setup.
Switching to Sleep Mode
To save battery power, Sleep Mode suspends your phone in
a low-power-consumption state while the display is off. Your
phone also goes into Sleep Mode by itself when the display is
automatically turned off after a certain period of time, which you
can set by pressing System settings Display Sleep
from the home screen.
Press the Power Key to switch to Sleep Mode.
3Getting Started
Charging the Battery
Note: For best performance, charge the battery fully prior to
using the phone for the first time.
Insert the charger’s connector into
the charging port. Be sure to insert the
connector in the correct orientation.
Do not force the connector into the port.
Plug the charger into a standard
AC wall outlet.
When the battery is fully charged,
unplug the charger and disconnect
it from the phone.
Note: If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In this
case, try again after charging the phone for at least 10 minutes.
Contact customer service if you still cannot power on the phone
after prolonged charging.
Powering Your Phone On/Off
Make sure the micro-SIM card is in your phone and the battery is
charged.
• Press and hold the Power Key to power on your phone.
• To power it off, press and hold the Power Key to open the
options menu. Tap Power off OK.
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or
reset it to factory settings (see Phone Settings – Factory Reset),
you need to set up your phone settings before using it.
2 Getting Started