1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-363
© 2000, ADC Telecommunications, Inc.
DLP-785
Page 7 of 7
Table 785-3. Frame Relay Interface Configuration Options
SELECTION DEFAULT OPTIONS DEFINITIONS
Interface Name <default> Any alphanumeric
characters.
User defined. Can describe the card type, slot,
port, and/or channel number, etc.
Interface Contact <default> Any alphanumeric
characters.
User defined. Can describe the name, number
etc. of contact person.
Interface
Location
<default> Any alphanumeric
characters.
User defined. Can describe the location of the
plant, shelf, slot, port, etc.
Recording
Interface ID
All 0s Numeric Identifies the site card and port location for
customer billing capabilities, (allows assignment
of a customer ID for each port), limited to 15
numeric characters.
Operational
Status
Up Display Only Indicates the operational status of the interface.
Provisioned
Endpoints
0 Display Only Displays how many FR endpoints are configured
by administrator on this interface.
DLCI Length 2 Octets 10
Bits
Display Only Indicates the size of the data link connection
identifier assigned to this interface.
Used Bandwidth Traffic
Dependant
Display Only Indicates a percentage of Ingress and Egress
bandwidth utilized for the selected interface.
Effective
Bandwidth
Traffic
Dependant
Display Only Indicates a percentage
Interface Type UNI UNI
NNI
User to Network Interface
Network to Network Interface
IWF Type FRF.5 FRF.5
FRF.8
Frame Relay Forum standards.
Frame Relay to ATM inter-working type.
Signaling
Protocol
None None
LMI Rev 1
Annex D: ANSI-
T1.617D
Annex A: CCITT-
Q933A
