A SERVICE OF

logo

73
5
Monitoring the Projector
Over a Network
The software included with your projector lets you control your
projector(s) over a network.
Use EMP Monitor (available for Windows only) to see your
projectors’ status, switch image sources, and control basic settings.
Use the e-mail notification function to receive alerts about
possible problems.
Use a network management utility running SNMP to manage
your facility’s equipment from a pre-existing system.
To use the software to manage your projectors, first install EMP
Monitor. Then connect and configure each projector you want to
monitor as described here.
This chapter covers the following information:
Installing the network software
Connecting the projector a network
Selecting network settings
Monitoring and controlling the projector with EMP Monitor
Using e-mail alerts
Using a browser to monitor the projector
Understanding the notifications messages
note
If you’re using a network
management utility running
SNMP, you can configure
your network to send trap
alerts (see page 76). This
feature is intended for use by
network administrators
only.