The LCD of the control panel indicates the projector's status. Also, you can
check the detailed status or error history of this projector by using the
buttons on the control panel.
a
Make the following settings to use the status monitor when the
projector is in standby mode.
• Set Standby Mode to Communication On.
s Extended - Standby Mode p.122
• Set A/V Output to Always On.
s Extended - A/V Settings - A/V Output p.122
Checking the Status
To display the status monitor, press the [ ] button on the control panel.
There are eight display categories for the status monitor, and each time you
press the [
][ ] buttons, the category switches in the following order.
You can check the items and information of each category by using the
[
][ ] buttons.
a
The status monitor turns on in the following situations:
• When one button is pressed on the control panel
• When an error or a warning occurs
• When adjusting the zoom, focus, or lens shift
• When checking the projector ID
s "Checking the projector ID" p.39
If you do not want to turn on the status monitor, set Lighting Time
to Off in the status monitor setting.
s "Setting the screen display (LCD)" p.152
Reading Status Monitor
150
