Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment.
The shape of a test pattern depends on the setting in Screen Type. Set the
Screen Type first.
s "Screen Settings" p.32
a
Press the [Test Pattern] button while projecting.
b
Press the [ ][ ] buttons on the remote control or the [ ] button
on the control panel to change the test pattern.
Using the remote control Using the control panel
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name Sub Menu/Items
Image
Color Mode s p.70
Color Temp.
Advanced
- Gamma
*1
s p.76
- RGB
- RGBCMY s p.76
Reset
Signal
Auto Setup
Settings
Geometric Correction s p.60
Extended
Multi-Projection
*2
s p.80
*1 Except for Customized
*2
Except for Black Level
a
To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
c
Press the [Esc] button to close the test pattern.
Installing the Projector
34
