Changing the direction of the image (Projection)
You can change the direction of the image using Projection mode in the
Configuration menu.
s
Extended - Projection p.122
When Front is used, the image directions for each projection mode are as
follows.
Front (default) Front/Upside Down
Rear Rear/Upside Down
Selecting the lamp
When the installation is complete, select the lamps you want to turn based
on the usage or condition.
a
Press the [Menu] button while projecting.
b
Select Lamp Select from Extended.
c
Select the lamp to be turned on, and then press the [ ] button.
The lamp turns on according to the selection.
Dual
(default)
Both Lamp 1 and Lamp 2 turn on. When one of the lamps
dies, the other lamp remains on.
Single
When the projector is turned on, the lamp with less total
operation time turns on. When one of the lamps dies, the
other lamp turns on.
Lamp 1
Lamp 1 turns on. When Lamp 1 dies, Lamp 2 turns on.
Lamp 2
Lamp 2 turns on. When Lamp 2 dies, Lamp 1 turns on.
d
Press the [Menu] button to finish making settings.
Installing the Projector
31
