Indicator Cause Remedy or Status Status Monitor Dis‐
play
Power Status Lamp1/
Lamp2
Temp Filter
Blue -
Flashing
Status
varies
Orange -
Flashing
Status
varies
Status
varies
Replace Lamp Either Lamp1 or Lamp2 that is indicated by the flashing indicator is due for
replacement. Replace it with a new lamp.
s "Replacing the Lamp" p.175
If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. Replace it with a new lamp as
soon as possible.
We recommend replacing both lamps together to maintain consistent hue and
brightness of projected images.
-
Status
varies
Status
varies
Orange -
Flashing
Status
varies
Status
varies
Mismatching of
lamp types warn‐
ing
The message "Lamp 1 and Lamp 2 do not match. Turn off the projector and
install two standard lamps or two portrait mode lamps depending on the
orientation of the projector." is displayed.
The lamp unit for portrait use is attached to either Lamp 1 or Lamp 2. Turn off
the power, remove the power cord from the electrical outlet, and the check the
lamp units attached to Lamp 1 and Lamp 2. When performing portrait
projection, attach lamp units (for portrait use) on both Lamp 1 and Lamp 2.
When performing portrait projection, attach standard lamps on both Lamp 1
and Lamp 2.
s "Replacing the Lamp" p.175
The projector automatically turns off about one minute after it detects that the
lamps do not match.
Lamp Mismatch
Reading the Indicators
146
