l
Press the [ ][ ] buttons to adjust the linearity.
Correct it so that the distance between lines is equal.
When the [
] button is pressed
When selecting Horizontal Corner When selecting Vertical Corner
When the [ ] button is pressed
When selecting Horizontal Corner When selecting Vertical Corner
m
To complete the corrections, press the [Menu] button.
a
You can fine tune the results of Corner Wall using Point Correction.
Change Geometric Correction to Point Correction, and then make
adjustments after selecting Keep the current geometric correction
settings.
s "Point Correction" p.65
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode Application
Dynamic
Ideal for use in a bright room. This is the brightest
mode.
Presentation
Ideal for making presentations using color materials
in a bright room.
Theatre
Ideal for watching films in a dark room. Gives
images a natural tone.
Photo
*1
Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
Sports
*2
Ideal for watching TV programs in a bright room.
The images are vivid and brought to life.
sRGB
Ideal for images that conform to the
sRGB
g
color
standard.
DICOM SIM
*1
Ideal for projecting X-ray photographs and other
medical images. This produces images with clear
shadows. The projector is not a medical device and
cannot be used for medical diagnosis.
Multi-Projection
Ideal for projecting from multiple projectors.
Minimize the color tone difference between each
projected image.
*1 This can only be selected when inputting RGB signals.
*2 This selection is only available when the input signal is component video, or
when the input source is Video or S-Video.
Adjusting Projected Images
70
