A SERVICE OF

logo

Setup by Connecting the Computer and Projector
with a USB Cable
a
The following operating systems support the batch setup function.
Windows Vista and later
Mac OS X 10.5.3 and later
Saving settings to a computer
a
Disconnect the power cord from the projector, and check that all
of the projector's indicators have turned off.
b
Connect the computer's USB port to the projector's Service port
with a USB cable.
c
While holding down the [Esc] button on the remote control or the
control panel, connect the power cord to the projector.
When all of the projector's indicators turn on, release the [Esc]
button.
Power Status Lamp1 Temp
Blue - On Blue - On Orange - On Orange - On
The projector is recognized as a removable disk by the computer.
Batch Setup
53