4-107
Printing with Epson Drivers for Windows | 107
The widths shown in the table on page 106 work with the Standard
Expansion setting. If you use the slider to adjust the amount of expansion (as
described on page 104), you can calculate the image width as follows:
• Using the Min setting, subtract 0.125 inch from the media width to
determine the image width.
• Using the Max setting, subtract 0.415 inch from the media width to
determine the image width.
Choosing Cut Sheet Paper Options
1. On the Properties window, click the Paper tab. You see this window:
2. Select Sheet as the Paper Source setting.
3. If you want to print to the edges of the page, click
Borderless. Note
that borderless printing applies only to the left and right sides of the
page on cut sheets; margins are required at the top and bottom of the
page. For full-bleed borderless printing, use roll paper, as described on
page 103.
7800-9800Guide.book Page 107 Monday, April 10, 2006 11:59 AM
