4-111
Printing with Epson Drivers for Windows | 111
You see the following:
Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
• Color Density lets you control the ink saturation level (for example,
when you turn off color management in your printer software).
• Drying Time per Print Head Pass lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry.
• Paper Feed Adjustment helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Suction lets you decrease the paper suction level when
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
• Paper Thickness helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
• Cut Method decreases the cutting blade pressure for thinner media,
and adjusts the speed for thick media. You may need to experiment
to determine the best setting for your paper.
Note: You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
7800-9800Guide.book Page 111 Monday, April 10, 2006 11:59 AM
