Leaving the Setup Program
When you finish using the setup program, press
?
until
Exit
is
highlighted and then press Enter. The screen displays a list of the
current setup program settings and a menu:
SETUP
Utility version 4.00
Copyright
(c)
SEIKO
EPSON
CORP.
1988
Memory
size
Display
type
Coprocessor
Mass
storage
Backlight
period
Main
640 KB
Expansion
0KN
color/graph. 80 col
80287 not
installed
Drive
A(internal): 1.44
MB
Drive
B(external): None
Drive
C:
Type 2(20MB)
3.0 minutes
return
to
main
menu,
L
aelect
option,
Enter
return
to
main
menu,
F1
change
Check the list to make sure all the information is correct:
l
If any setting is incorrect, highlight
Change settings
and
press Enter. The main setup menu appears again and you can
correct the setting.
l
If you did not make any changes or if you want to cancel the
changes you made, highlight
Exit without saving
and
then press Enter. The Reference diskette’s operation menu
appears. Press 0 and then Enter to exit to MS-DOS. Then
remove your Reference diskette and insert your working copy of
the Startup/Operating 1 diskette.
Running the Setup Program
2-13
