55 MS6000-EU-EN V1.4 8/12
4.5.5 DISPLAY
The waveform display is affected by settings of the oscilloscope. A waveform can be measured once it is
captured. The different styles to display a waveform on the screen give significant information about it.
There are two modes to display waveforms; Single-window and Double window.
Refer to Horizontal Controls
for more information.
Press the Utility button and then the DISPLAY button on page 4 of the Utility menu.
Options Settings Comments
Type (F1)
Vectors
Dots
‘Vectors’ fills up the space between adjacent sample points
in the display; ‘Dots’ displays the sample points only.
Persistency (F2)
Auto
0.2S-8S selectable
Infinite
Length of time to display each displayed sample point.
DSO mode (F3)
YT
XY
YT – normal or standard signal view
XY – XY format
Contrast (F4) 0-15 Use the Multifunction control to set the display contrast.
Menu page 2
Grid (F2)
Dotted Line
Real Line
Off
Set up for display of the grid lines.
Grid Intensity (F3)
Use the Multifunction control to set the brightness of the
displays Grid lines.
Refresh Rate (F4)
Auto
30, 40, 50 Frames
Set refresh rate of display (default is Auto)
Menu Page 3
Wave Bright (F2)
Use multifunction control arrow keys to change waveform
brightness.
BL Keep (F3)
Unlimited
5, 10, 30, 60 Sec
Set how long the Backlight is on before it turns off
Menu Keep (F4)
Unlimited
5, 10, 30, 60 Sec
Set how long the Menu is displayed before it turns off
