page 94/22/04
RX2600 consoles
Booting VMS from the EFI menu
• Create new menu item
– Select Boot Option Maintenance Menu
– Select Add Boot Option
– Select volume
– Select efi\vms\vms_loader
– Add name, “HP OpenVMS Industry Standard 64”
– No boot options are needed, since it uses
VMS_FLAGS stored in NVRAM
– Save settings to NVRAM
page 104/22/04
RX2600 consoles
Boot Example
EFI version 1.10 [14.61]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF zx6000/rx2600/zx2000 1.22 [Wed Jul 23 16:43:12 2003] - HP
Copyright (c) 2000-2002 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7
Loading ’FPSWA’...
Loading ’lsi1030’...
Loading ’gigundi’...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager
Scsi(Pun0,Lun0) HP 18.2GST318406LC HP05 ( 40 MBytes/sec)
Scsi(Pun4,Lun0) HP 18.2GATLAS10K3_18_SCAHP05 ( 40 MBytes/sec)
Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI)
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.20 [4331]
Please select a boot option
Boot VMS on DKB0
EFI Shell [Built-in]
Boot Option Maintenance Menu
System Configuration Menu
Use ^ and v to change option(s). Use Enter to select an option
