Version 1.2 Page 38 4/22/04
Type R to reset the MP or [Q] to quit the diagnostic menu.
-> Choice: R
The MP is now being reset...
HP Management Processor
Firmware Revision E.02.10 Oct 1 2002,15:53:45
(c) Copyright Hewlett-Packard Development Company, L.P. 1999-2002. All Rights Reserved.
Type Ctrl-B to activate MP Command Interface.
(Crtl/B typed to gain management processor attention.)
Leaving Console Mode - you may lose write access.
When Console Mode returns, type ^Ecf to get console write access.
Management Processor login: (<cr>)
Management Processor password: (<cr>)
Hewlett-Packard Management Processor
(c) Copyright Hewlett-Packard Development Company, L.P. 1999-2002. All Rights
Reserved.
System Name: uninitialized
*************************************************************************
MP ACCESS IS NOT SECURE
No MP users are currently configured and remote access is enabled.
Set up a user with a password (see SO command)
OR
Disable all types of remote access (see EL and ER commands)
*************************************************************************
MP Host Name: uninitialized
MP> xu
