3745 Control Panel
3745 Control Panel Use
Attention: Providing that the UEPO switch has
not been activated, the control panel always
has power and will display information on
power control and service even though the
3745 is powered OFF.
Purpose of the Control Panel
The control panel allows the execution of functions
which:
1. Are not possible via the console.
2. Must to be operational before the MOSS is
IMLed.
Uses of the Control Panel
The control panel is used to:
Control the power
Operations from the panel for power are:
– Set Power Control Mode to Network,
Local, or Remote
– Power On/Power On reset
– Power Off
– Unit Emergency Power Off
Perform basic functions which are:
– General IPL from disk
– MOSS IML from disk
– MOSS dump
– Request local console
– Force local console
– Panel test
– Remote/Alternate console link test
– RSF console link test
– Local console link test
– Load from diskette
– Loop on MOSS diagnostics
– Display stacked errors
Indicate the machine status via indicators
which show:
– Function selected
– Hex code displayed
– Current service mode
– Power control mode
– Console in use
– All channel adapters disabled
– MOSS inoperative
– MOSS message waiting
– Power On Indicator ON
Sound an audible alarm if an invalid action is
attempted.
1-78 3745 Models 130 to 17A: MIP
